agilent
-
چیلر آزمایشگاهی | خرید چیلر آزمایشگاهی | فروش چیلر آزمایشگاهی
560,000,000 ریالچیلر آزمایشگاهی | خرید چیلر آزمایشگاهی | فروش چیلر آزمایشگاهی
فروش چیلر های ازمایشگاهی / G8481A
Agilent chiller:
– Electrical Requirements: 220-240VAC, 50Hz, 1450 VA
– Voltage ±10%, Frequency ±1Hz
– Cooling capacity:
– Axial system: 1 kW
– Radial system: 200W
– Flow rate: 1.1 L/min (0.3 gpm) minimum
– Recommended inlet temperature: 20°C (68°F)
Maximum for Agilent 720 Series ICP-OES: 30°C (86°F)
Maximum for Agilent 710 Series ICP-OES: 4°C (113°F)
– Minimum inlet pressure: 55 kPa (8.0 psi)
– Maximum inlet pressure: 310 kPa (45 psi)
– Weight: 181 lb. (82 kg)
– Dimensions: 368 x 575 x 702 mm
ا Working Temperature
Range °C -10° to 40°
-
چیلر آزمایشگاهی | خرید چیلر آزمایشگاهی | فروش چیلر آزمایشگاهی
428,000,000 ریالG1879A Agilent
Agilent heat exchanger:
Heat to be dissipated: 1,600W approximately
Flow Rate: > 5L/min
Inlet pressure: 230-400kPa (33-58psi)
Temperature: 15-40 ° C at water inlet of ICP-MS
Conductivity : 50-150µS at the chiller reservoir
Water Filter: <100 microns particle size
Connections:
Hose 1 × 10m long, ID=12mm (7/16inch); Male PT 1/2inch fittings on the
7700 ICP-MS end
Dimensions: 57.2 x 38.0 x 51.4 cm
Weight: 42Kg
-
خرید Mini Thermal Disorber/ فروش Mini Thermal Disorber
380,000,000 ریال7667A Mini Thermal Desorber
*Operating temp range: 5 to 45 °C
*Operating humidity range: 5 to 95% (noncondensing )
*Carrier gas: 50 -85 Psi
*Conditioning flow: 50 ml/min
*Conditioning time: 20 min
*Conditioning temperature: 320 °C
*Transfer line temperature: 150 °C
*Valve box temperature: 150 °C
*Type of carrier gas: Nitrogen/Helium
-
چیلر آزمایشگاهی | خرید چیلر آزمایشگاهی | فروش چیلر آزمایشگاهی
375,000,000 ریالChiller G3292A Agilent
– Electrical Requirements: 220-240VAC, 50Hz, 1450 VA
– Voltage ±10%, Frequency ±1Hz
– Cooling capacity:
– Axial system: 1 kW
– Radial system: 200W
– Flow rate: 1.1 L/min (0.3 gpm) minimum
– Recommended inlet temperature: 20°C (68°F)
Maximum for Agilent 720 Series ICP-OES: 30°C (86°F)
Maximum for Agilent 710 Series ICP-OES: 4°C (113°F)
– Minimum inlet pressure: 55 kPa (8.0 psi)
– Maximum inlet pressure: 310 kPa (45 psi)
– Weight: 181 lb. (82 kg)
– Dimensions: 368 x 575 x 702 mm
ا Working Temperature
Range °C -10° to 40°
-
پمپ خلاء خشک | پمپ خلا آزمایشگاهی
TriScroll-800 Dry Vacuum Pump:
*Pumping speed @ 60 Hz: 760 l/m, 48 m3 /hr, 28.3 cfm (at 60 Hz drive frequency, variable)
*Ultimate pressure: <1.3 x 10-1 mbar (1.0 x 10-1 Torr)
*Maximum inlet pressure: 1.0 atmosphere (0 psig) transient, 100 Torr steady state
*Maximum outlet pressure: 1.1 atmosphere (1.5 psig)
*Inlet connection: NW40
*Exhaust connection: 3 ⁄ 8 ” Female NPT with swivel (NW25 adapter provided)
*Exhaust connection adapter: NW 25 KF adapter provided
*Gas ballast: 1 ⁄ 4 ” Female NPT (shipped with port plug installed)
*Operating voltages: 200-240V, 1Ø, 50/60Hz
*Maximum line current: 200V; 6 A 240V; 5 A
*Weight – pump only: 32 kg (71 lbs)
*Compliance: CE, CSA/CUS
-
-
-
خرید کروماتوگراف مایع / فروش کروماتوگراف مایع Agilent
1260Infinity II
- Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the 1260 Infinity II Quaternary Pump and the 1260 Infinity Binary Pump are a perfect match for our Poroshell 120 columns.
- Analytical and semi-preparative purifications – the wide flow range of the 1260 Infinity II Quaternary Pump (up to 10 mL/min) perfectly supports standard and semi-preparative applications.
- Fast and precise gradients – the 1260 Infinity II Binary Pump is the perfect choice for fast and precise gradients using LC/MS, as well as UV-only systems.
- Ultralow carryover – the multiwash capability of the 1260 Infinity II Multisampler cleans all relevant injection parts between runs. This sophisticated, integrated feature flushes the injection needle outside with three solvents, and uses seat backflush procedures to reduce carryover to less than 10 ppm.
- Reduced cycle times – with Agilent’s unique dual-needle design, which allows you to run samples alternately through one or the other injection path. Cycle times can be reduced to mere seconds, virtually eliminating conventional wait times – whether for large volume loadings or flushing procedures.
- Efficient sample handling and logistics – using shallow well-plate drawers, the 1260 Infinity II Multisampler takes a maximum load of 16 microtiter plates and up to 6,144 samples – the most of any single system.
- Efficient column handling and temperature control – the 1260 Infinity II Multicolumn Thermostat holds up to four columns with direct access to each column through a Quick-Change switching valve, delivering flexibility and eliminating the need to disconnect and reconnect columns.
- Fast and easy connections – with InfinityLab Quick-Connect fittings to save time and trouble.
- Higher quality data – the 1260 Infinity II Diode Array Detector HS delivers lower detection limits and higher data quality for more confidence.
- Efficient control, acquisition and reporting – Agilent’s Instrument Control Framework (ICF) enables smooth control of Agilent LC instrumentation through third-party chromatography data systems.
-
فروش دستگاه جذب اتمی AA240 کمپانی agilent
فروش دستگاه جذب اتمی AA240 کمپانی
فروش جذب اتمی / خرید جذب اتمی / جذب اتمی چیست / طیف سنجی جذب اتمی / بدانیم در مورد atomic absorption / قیمت دستگاه جذب اتمی
اسپکتروفتومتری جذب اتمی (AAS)
طیف سنج جذب اتمی(AAS) Atomic Absorption Spectrometer یک روش طیف سنجی برای اندازه گیری مقدار عناصر شیمایی ، حاصل از جذب نور اتم در حالت گازی است .برای اندازه گیری مقدار یک عنصر در نمونه کار برد دارد. مبنای این روش جذب تشعشات الکترومغناطیس اتم های یک عنصر است . از این روش در شناسایی بیش از 70 عنصر استفاده می شود اما دقت در عناصر مختلف متفاوت می باشد
agilent
-
-
خرید Infinity II LC 1220 / فروش Infinity II LC 1220
Infinity II LC 1220
Weight 30 kg Dimensions 640 × 370 × 420 mm Permitted Ambient Temperature 4 ˚C – 55 ˚C Permitted Ambient Humidity < 95 % r.h. at 40 ˚C Hydraulic System Dual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and passive inlet valve Gradient Formation Low pressure dual mixing/gradient capability using proprietary high-speed proportioning valve, Pump delay volume 600 – 900 μl, system delay volume 800 – 1100 μl, dependent on back pressure Pressure Operating range 0 – 20 MPa (0 – 200 bar, 0 – 2950 psi) up to 10 mL/min (all versions), Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5880 psi) up to 5 mL/min, Operating range 0 – 60 MPa (0 – 600 bar, 0 – 8700 psi) up to 5 mL/min Power Requirement 240 VA Flow Rate 0.2 – 10.0 mL/min Flow Precision <0.07% RSD, or < 0.02 min SD whatever is greater, based on retention time at constant room temperature Flow Accuracy ± 1% or 10 μl/min whatever is greater Settable flow range 0.001 – 10 mL/min, in 0.001 mL/ min increments pH Range 1.0 – 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel Injection Range 0.1 – 100 μL in 0.1 μL increments, Up to 1500 μL with multiple draw (hardware modification required) Replicate Injections 1 – 99 from one vial Sample Tray Capacity 100 × 2-mL vials in 1 tray, 15 × 6-mL vials in ½ tray (Agilent vials only), 40 × 2-mL vials in ½ tray Minimum Sample Volume 1 μL from 5 μL sample in 100 μL microvial, or 1 μL from 10 μL sample in 300 μL microvial Sample Viscosity Range 0.2 – 50 cp Injection Cycle Time Typically 50 s depending on draw speed and injection volume Column Oven Capacity (Internal volume: 6 μL), One 25-cm column Oven Temperature Range 5 °C above ambient to 80 °C Detector [Diode Array Detector (type: 1024-element diode array, Light source: Deuterium and tungsten, Sampling rate: 80 Hz, Wavelength range: 190-950 nm,, Slit width: 1,2,4,8,16 nm, Diode width: <1 nm)], [Variable Wavelength Detector (Detection type: Double-beam photometer, Light source: Deuterium lamp, Wavelength range: 190 – 600 nm, Band width: 6.5 nm typical)] Software ChemStation, EZChrom, Instrument Utility, LabAdvisor -
-
-
خرید کوره جذب اتمی / فروش کوره اجیلنت
GTA120 agilent
GTA 120 Zeeman:
*Extremely fast atomization
*Best signal-to-noise
*Reduced running costs
*Programmable Sample Dispenser (PSD)
*Simple method development
*Longer unattended runs
*Weight:
Net: 48 kg Shipping: 83 kg
*Dimensions (W x D x H):
Control unit 240 x 570 x 580 mm
Zeeman 220 x 290 x 340 mm
Packed 950 x 760 x 900 mm [includes PSD]
*Gas supplies:
Recommended pressure: 140 kPa (20 psi)
Maximum pressure: 350 kPa (50 psi)
Normal flow rate approx: 0–3.5 L/min
*Water Supply
Maximum temperature 40 °C (104 °F)
Recommended temp. range: 18–25 °C (64–70 °F)
Minimum flow rate required: 1.5 L/min at 180 kPa (27 psi)
Typical flow rate at recommended pressure range: 1.5–2.0 L/min
Maximum pressure to the regulator: 700 kPa (100 psi)
-
-
اتوسمپلر ASX 520
ASX 520
Operating Temperature: 10° to 30°C
Relative Humidity: 0% to 95%
Altitude: 0 to 10000 Ft
Dimensions (H x W x D): 61 with sample probe x 48.2 x 48.2 cmWeight: 10.5 kg
Trays: 4 racks capacity
Communication interface: USB (virtual COM port); 2 Serial (RS-232) ports
Power supply: 100-240 VAC, 47-63 Hz, 1.9A